Operating the Monitor
OPEN/CLOSE THE DISPLAY MONITOR
To open the display monitor, push the "OPEN" latch and pull the monitor down to the desired position. To close the display monitor, push the monitor up until it latches closed with an audible click.
Power Up/Down the Display Monitor
The unit will power up when the display monitor is unlatched and pulled down. (If the unit does not power up, press the Power button on either the remote or on the left side of the LCD screen.
To turn the power Off to the unit, press the POWER button on the remote or press and hold power button on left side of screen for 4 seconds. Also the power will shut Off when the display monitor is placed in the closed and latched position.
If the hand icon displays in the upper
FUNCTION MODE (MENU)
Press remote "VIDEO MENU" button or monitor "MENU" sequence as follows:
button to activate the screen set up
TFT Video Menu
Color | 8 |
Brightness | 8 |
Tint | 8 |
Sharpness | 8 |
Contrast | 8 |
Dimmer | OFF |
Format | FULL |
Reset | X |
RESET: Resets COLOR, BRIGHTNESS, TINT, DIMMER, FORMAT to factory settings.
Once the desired setting is selected with the S or T buttons, press the cursor key to the desired setting. Once the correct function is selected, press the cursor keys W or X (for the desired adjust- ment).
16 | © 2005 Directed Electronics, Inc. all rights reserved |
|