Dolby Laboratories DVD26 manual Changing your password, Factory settings, Remote IR

SETTINGS IN THE SETUP MENU

•Use the number buttons to enter a 4-digit password. It’s also possible to use the cursor buttonsto set the password (up and down to set the number; left and right to change the cursor position).

•Press SELECT to register the password.

AUDIO VIDEO LAN GENERAL PROG

OLD PASSWORD :

NEW PASSWORD :

CONFIRM :

PLEASE ENTER OLD PASSWORD
MOVE	SETUP : Exit

Note! The password stays with operation 'Factory reset'.

Changing your password

To change your password, confirm your existing password then enter a new one.

•Select ‘Password Change’.

•Use the number buttons to enter your existing pass- word.

The numbers appear as asterisks as you enter them.

It’s also possible to use the cursor bottons to set the password (up and down to set the number; left and right to change the cursor position).

•Press SELECT.

•Enter a new password.

•Press SELECT.

18

Factory settings

All setups you have made will be zeroed.

AUDIO VIDEO LAN GENERAL PROG

PARANTAL LOCK	NO PARANTEL
PARANTAL PWD	CHANGE
FACTORY SETTINGS	RESET
REMOTE IR	FRONT REMOTE
RESUME MODE	OFF
RECALL FACTORY SETTINGS
MOVE	SETUP : Exit

Remote IR

The DVD26 is controlled by an infra/red remote controll pointed at the front panel.

The DVD26 can also be controlled using the IR/input at the back panel.

AUDIO VIDEO LAN GENERAL PROG

PARANTAL LOCK	NO PARANTEL
PARANTAL PWD	CHANGE
FACTORY SETTINGS	RESET
REMOTE IR	FRONT REMOTE
RESUME MODE	BACK REMOTE
SELECT BACK/FRONT REMOTE
MOVE	SETUP : Exit

For security reasons this setting disappears every time the DVD26 player is switched off using the main switch. You have to go back to the setup menu to reactivate it.

DVD26 DVD AND CD PLAYER USER GUIDE