Standard Connections Getting Started | Dolby Laboratories DVD Video

STANDARD CONNECTIONS	GETTING STARTED

PROGRAMMING THE UNIVERSAL REMOTE CONTROL

The remote control of the DVD-Video player can be program- med to control your Television, Amplifier or Receiver. For the control of these products the following buttons on the remote control are available:

•Amplifier - Volume Up/Down and Audio Mute.

•Receiver - Volume Up/Down and Audio Mute.

•Television - Volume Up, Volume Down, Channel Up/Down and TV Mute.

In order to change the remote control to control your brand of Television, Amplifier or Reciever follow the next steps.

1Select either your brand of Television, Amplifier or Receiver from the next table. Mark the first 3 digit code number behind the brand name.

2Press ENTER en RETURN simultaneously until the Jog/Pause button lights up.

NOTE

- Note that your remote control is now disabled for all functions.

3Enter the digits of the selected 3 digit code number. Every time you enter a digit, the Jog/Pause button will blink shortly. When entering the last (3-rd) digit, the Jog/Pause button will blink twice and then switches off to confirm that the programming sequence was correctly executed.

NOTE

-In case you press a wrong key or an incorrect number, the Jog/Pause button will switch off and flashes once. The remo- te control has not been re-programmed. Repeat step 1,2 and 3.

4The remote control is now programmed to control your Television or Amplifier or Receiver. If it does not react properly on the mentioned buttons, select the next 3 digit code number behind the your brand of Television, Amplifier or Receiver and repeat step 2 and 3.

AMPLIFIERS CODE		RECEIVERS CODE
Aiwa	431	Aiwa	536, 546, 573, 581,
Grundig	420, 432		586, 606, 617, 636,
Kenwood	428, 447		647, 649
Marantz	420	Denon	502, 704
Philips	420, 445	Grundig	557, 561, 580
Pioneer	401	Harman/Kardon 531
Sony	415	JVC	521, 630, 645, 658
Technics	423, 434	Kenwood	510, 523, 589, 590
Yamaha	427	Luxman	660, 705
		Marantz	538, 557, 568
		Onkyo	528, 535, 539
		Philips	557, 663, 677
		Pioneer	582, 645
		Sansui	665, 689
		Sony	545, 549
		Technics	564, 588
		Yamaha	526, 551, 691

TELEVISION		CODE	TELEVISION		CODE

Bang & Olufsen			Samsung	000, 007, 030, 032,
	057,058			059, 134, 155, 166,
Grundig	048, 115, 119, 124,			184, 206, 253, 257
	256, 267, 271		SBR	010, 011, 030, 033,
Hitachi	026, 029, 033, 034,			117
	064, 071, 074, 079,		Schneider	011, 030, 135, 148,
	095, 120, 121,134,			172, 181, 188, 197,
	137, 139, 160,173,			207, 221, 268
	196, 230, 269, 273,		Sony	001, 008, 009, 029,
	276			075, 263
JVC	029, 039, 047, 092,		Telefunken 006, 051, 056, 068,
	098, 114, 116, 207			074, 130, 151, 154,
Panasonic	095, 130, 131, 138,			173, 187, 194, 251,
	149, 192, 204, 273			260
Philips	000, 010, 011, 030,		Thomson	074, 120, 121, 124,
	033, 058, 117, 181,			165, 170, 186, 194,
	209, 271			196, 223
Radiola	010, 030, 181		Toshiba	028, 029, 048, 147,
Saba	052, 058, 074, 095,			262, 270
	120, 121, 124, 130,
	165, 170, 187, 194,
	273

OPERATION

NOTE

-Unless otherwise mentioned, all operations can be carried out with the remote control. Always point the remote control directly at the player, making sure there are no obstructions in the path of the infrared beam.

-When there are corresponding keys on the front panel, they can also be used.

SWITCHING ON

1Switch on the TV and select the video input for your DVD- Video player.

2To enjoy sound through your stereo system, turn on the system and select the source input for the DVD-Video

player.

To enjoy DVD-Video with multichannel (surround) sound, switch on the Home Theatre system and select the source input for your DVD-Video player.

3On the back of the DVD-Video player, press ON/OFF. The player display lights, and the OSD invites you to insert a disc.

4With Autoplay on (the factory setting) any disc already inserted in the player starts to play.

Insert disc

Dolby Laboratories DVD Video manual Standard Connections Getting Started, Operation, Switching on