Directed Video DV-POD manual DVD Player-Installation, DVD-MEMORY Card Mounting

DVD—MEMORY CARD MOUNTING

Ensure that the memory cards are mounted with the logo side of the memory cards oriented with the

arrows as shown below:

Memory Stick

Logo

Side

Logo

Side

Compact Flash

Logo

Side

Secure Digital

WARNING: DO NOT CLOSE THE LCD SCREEN IF A MEMORY CARD HAS BEEN INSERTED INTO THE DVD PLAYER. THIS CAN CAUSE THE LCD SCREEN TO BREAK OR LEAK FLUID. IF YOU SHOULD COME IN CONTACT WITH LEAKED FLUID, WASH THE AFFECTED AREA THOROUGHLY WITH WATER AND SEEK IMMEDIATE MEDICAL ATTENTION. REMOVE ALL MEMORY CARDS BEFORE CLOSING THE LCD SCREEN.

DVD Player—Installation

1.Ensure power to the monitor is off and that the ignition key is off.

2.Align the notches in the side of the player with the tabs in the sides of the monitor DVD mount- ing area and slide the player into the monitor.

3.Slide the player towards the LCD screen until the lock/unlock button latches.

NOTE: If the DVD player doesn’t power up correctly, remove the player (see instruc- tions below) and then re-install.

© 2005 Directed Electronics, Inc. 11