The Remote does NOT Function
Are there obstacles obstructing the view between the monitor and the remote. The distance between the remote and monitor is too great.
The remote is not being pointed at the IR receiver on the DVD player.
The batteries in the remote are weak.
DISC does NOT Play
Parental code is set lower than than allowed by the DVD mounted.
Ensure the disk is mounted in the player with the correct orientation (shiny side up). The disk is warped.
The player cannot play certain formats (see the beginning of this manual). The region code on the DVD does not match the player.
Moisture condensation has occurred within the player. Leave the unit on and the disc access cover open and try again after about 30 minutes.
The disc has not been properly finalized (formatted) when recorded. Refer to your manual that came with your disc authoring equipment.
30 | © 2005 Directed Electronics, Inc. |
|