Playing a Disc
Playing The DVD or CD
1Connect the DVD player to a television and press the POWER button to turn the DVD player on.
2Press the OPEN/CLOSE button to open the DISC DRAWER.
3 Load a disc into the DISC DRAWER, label side facing up, and press the OPEN/CLOSE button to close the DISC DRAWER.
4The loaded disc will begin playing automatically. If it does not, press the PLAY/PAUSE button.
Programming a DVD or CD
1Follow the instructions for “Playing a DVD or CD”.
2Press the PROG button on the remote.
3Press the DIRECTION buttons to highlight the blanks under title, chapter, or track.
4Use the NUMBER KEYPAD on the remote to enter in the title, chapter, or track number you wish to program.
5Highlight and press the
6To cancel the program, highlight the
Playing a JPEG DISC
1Load a JPEG disc into the DISC DRAWER.
2A slide show of JPEG photos from the CD will begin playing automatically.
3Press the STOP button to access a file view of the loaded JPEG disc.
4Use the DIRECTION/ENTER buttons on the remote to select and view photos.
10 GPX