Television

Auto Scanning for Channels

The Auto Channel Scan must be run before any channels can be viewed on the television.

1.Press the SOURCE button to switch to TV mode.

2.Press the MENU button to access the setup menu.

3.Press the ARROW () buttons to highlight the CHANNEL icon. Press the ENTER button.

4.Press the ARROW () buttons to highlight SIGNAL TYPE. Press the ARROW () buttons to select AIR.

5.Press the ARROW () buttons to highlight AUTO CHANNEL SEARCH. Press the ENTER button to begin scanning for available channels.

Channel List View

1.Press the SOURCE button to switch to TV mode.

2.Press the CH LIST button, on the remote, to view a list of available channels.

Unless you are using a Set-Top Box, you must auto scan for channels before being able to view channels in list view.

Adding Favorites

1.Press the SOURCE button to switch to TV mode.

2.Press the CHANNEL buttons to select the desired TV channel.

3.Press the ADD/ERASE button to add or erase the current channel as a favorite.

Viewing Favorites

1.Press the SOURCE button to switch to TV mode.

2.Press the FAV LIST button to view a list of your saved favorites.

Parental Controls (V-Chip)

1.Press the SOURCE button to switch to TV mode.

2.Press the MENU button.

3.Press the ARROW () buttons, highlight PARENTAL, and press the ENTER button.

4.The default passcode for the parental lock is: 0 0 0 0

5.Enter the passcode to access the PARENTAL CONTROL preferences.

6.From this menu, you can lock specific ratings from the United States rating system or the Canadian rating system by accessing the V-CHIP settings. You can also lock the buttons on the television or lock specific sources from access.

10 GPX