Control Definitions
14TFT Display The
15Infrared Receiver The Infrared Receiver receives signals sent from the remote control.
16Power Indicator The Power Indicator lights when the unit is turned on.
17Battery Compartment The Battery Compartment holds a Lithium Polymer Battery that powers the unit when charged. The battery can be charged by plugging the unit into an AC or DC power source using the included adapters.
18Coaxial Audio Output Use the Coaxial Audio Output to play audio from the unit on a connected stereo system. (Requires a Coaxial - 3.5MM Cable, not included)
19
20Audio & Video Output Use the Audio & Video Output to play audio or video from the unit on an external system. (Requires an RCA - 3.5 MM Cable, not included)
21Headphone Output 1 & 2 Use the Headphone Output 1 & 2 to listen to the unit through a set of head- phones. (Requires Headphones, one set included)
22Charge Indicator The Charge Indicator blinks when the unit’s internal battery is being charged. The Charge Indicator remains lit, without blinking, when the battery is fully charged.
23Power Switch Adjust the Power Switch to turn the unit off and on.
24DC Power Input (9V - 12V) Connect the DC Power Input to power the unit and charge the internal battery. (AC Adapter & DC Car Adapter included)
25USB Input Use the USB Input to connect a USB Thumb Drive to the unit. Media stored on the USB Thumb Drive can be played on the unit by switching to USB mode.
26SD/MMC Memory Card Slot The SD/MMC Memory Card Slot accepts SD and MMC memory card formats. Media stored on a loaded memory card can be played on the unit by switching to SD mode.
• The unit will only play some mainstream audio, AVI, JPG, and JPEG formats from SD or MMC Memory Cards.