Playing a CD
• Besides playing Audio CDs, the unit is capable of playing AVI files and JPEG files off of CDs.
1.Plug the unit into a standard 120V outlet, and turn the power on by moving the Power Switch into the ON position. If the internal battery is charged, the unit does not have to be plugged in.
2.Press the Open Button and load a CD into the unit’s
3.If the CD doesn’t start, switch the unit to DVD Mode by pressing and holding
DVD/SD/USB Function Button.
4.Press the Play & Pause Buttons to play and pause the CD.
5.Press the Previous & Next Buttons to skip backwards and forwards through CD tracks.
T R K 1 8 / 1 8 | 0 1 : 1 4 : 2 0 |
TFT
ON/OFF
DVD
TITLEAUDIO
PREV.NEXT
SETUP DISPLAY
PLAY/PAUSE DVD/SD/USB
OPEN
VOLUME
Programming a CD
1.Insert a CD into the unit. See the “Playing a CD” operation.
2.After the CD is inserted and loaded, press the Program Button on the remote control to display the Program Menu.
3.Use the Directional Buttons to move through the sixteen different program slots.
4.Highlight a slot and enter CD track numbers using the Number Keypad on the remote control. Repeat steps 3 and 4 until the desired tracks are programmed.
5.Highlight the “Play” button, on screen, using the Directional Buttons, and press the Enter Button to begin playing the programmed tracks.
T R K 1 8 / 1 8 | 0 1 : 1 4 : 2 0 |
PROG
1 | 5 | 9 | 13 | ||||
2 | 6 | 10 | 14 | ||||
3 | 7 | 11 | 15 | ||||
4 | 8 | 12 | 16 | ||||
|
| PLAY |
| CLEAR |
|
|
|