Grundig MPaxx 940, MPaxx 980, MPaxx 920, MPaxx 910 manual Power supply, Connecting to a computer

CONNECTION AND PREPARATION -----------

Power supply

The player operates with the integrated lithium-polymer battery 1 x 3.7 V, 150 mA.

Charging the battery

Charge the battery for the player on a computer.

You can also charge the battery by connecting it to a USB-compatible hi-fi sy- stem using a USB cable.

Note:

When charging with a standard USB adapter, the player is still ready for operation. Press »« to switch to playback mode.

1 Connect the USB socket on the player to the USB socket on the computer or hi-fi system using the USB cable or plug the charger lead into the USB socket of the player.

2 Switch on the computer or hi-fi or connect the charger to the power supply.

– The LED on the player flashes during the charging procedure. The charging time is approximately four hours. When the battery is fully charged, the LED lights up constantly.

Note:

The playing time is more than 15 hours when the player is fully charged.

Note:

There is a risk of explosion if the battery is not replaced properly. Only use the same type of battery or an equivalent.

Connecting to a computer

1Switch on the computer.

2 Switch off the player.

3Connect the USB socket on the player to the USB socket on the computer using the USB cable.

–A display appears on the computer screen as soon as the connection is made.

Note:

If the player is connected to the computer, you can select »« to switch to playback mode. The player icon then goes out on the computer screen. If you want to transfer data again, you must connect the player to the compu- ter again.

6