Grundig MPaxx 910, MPaxx 980 Switching on and off, Adjusting the volume, Resetting the player

Page 8

General functions --------------------------------------------------------------------------------

Switching on and off

1To switch on the player, press and hold down »«.

The LED switches on and starts flashing.

Playback then starts automatically (playback always starts with the first track in the root directory – if there is one).

The LED flashes during playback.

2 To switch off the player, press » « and hold it for 2 seconds. – The LED goes out.

Notes:

When you switch the player on again, playback starts at the same point as when it was switched off.

The player automatically switches off when the battery is low.

Adjusting the volume

1To adjust the volume, press »+« or »« as many times as necessary during playback.

Activating and deactivating the key lock

When the key lock is activated, all the buttons on the player are disabled.

1To activate the key lock, press and hold down »«.

2To deactivate the key lock, press and hold down »« again.

Resetting the player

In the event of a malfunction during operation or if the player no longer re- sponds to key commands, you can reset the player.

1To reset the device, use a pointed object such as a paper clip to press »RESET«.

Note:

When resetting, the player should not be connected to the computer or the USB charging device.

8

Image 8
Contents Digital Music Player Overview Supplied accessories Special featuresSafety Environmental noteOverview Reset Power supply Connecting to a computerDisconnecting from the computer Connecting earphonesSwitching on and off Adjusting the volumeResetting the player Activating and deactivating the key lockSelecting sound settings Starting music playbackPlayback functions Selecting tracksSystem requirements MP3/WMA data transfersTechnical data USB10/11 72011 408