DVDB01
BASIC OPERATION
Turning the Unit On/Off
Press the POWER 
button (1) on the front panel or remote control to turn the unit on/off.
Inserting a Disc
Insert a disc, label side up, into the disc slot (12). The player will start playback automatically.
Ejecting a Disc
Press the EJECT button (3) to eject the disc from the slot. The unit does not have to be on to eject a disc.
NOTE: Do not drive with an ejected disc in the slot.
Equalization
Press the EQ button (33) on the remote control to activate the equalization function. Continue pressing the EQ button to choose between the three equalizer modes (CLASSIC, POP and ROCK) or to turn the equalizer function off (DSP OFF).
Reset
The RESET button (16) is located on the front of the unit. You should engage the RESET button only in the following situations:
•After initial installation when all wiring is complete
•If all function buttons become inoperable
•If an error symbol appears on the display
To reset the unit, use a ballpoint pen or a thin metal object to depress the RESET button.
Audio Control
Volume
Press the VOL /\ button (8) to increase the volume, or the VOL \/ button (9) to decrease the volume.
Mute
Press the MUTE button (6) to silence the audio. Press MUTE again to resume audio.
Press the SEL button (10) on the front panel or remote control to select the desired audio adjustment mode. The adjustment mode will change in the following order:
Bass | Press SEL until “BAS” appears in | Press the volume buttons to adjust the Bass from +06 to |
| the display. |
|
|
|
|
Treble | Press SEL until “TRE” appears in | Press the volume buttons to adjust the Treble from +06 to |
| the display. |
|
|
|
|
Balance | Press SEL until “BAL” appears in | Press the volume buttons to adjust the Balance from 12L to |
| the display. | 12R. |
Clock Display
Press the T/F button (21) to alternate between playing time and clock time.
Setting the Clock
Press and hold the T/F button (21) on the remote until the clock display flashes, and then release. Next, press < (29) or << (7) to adjust the hour and > (29) or >> (4) to adjust the minutes. Continue changing the hour to move between AM and PM.
Mode
Press the MODE button (11) on the front panel or remote control to switch between disc (DVD/ VCD/CD/MP3) mode, AV IN1, or AV IN2 mode.
AV In Operation
You can connect another audio/video system to the unit through the AV IN terminals on the back (AV1 INPUT) or front panel (AV2 INPUT) of the unit. Once the device is connected, press the MODE button (11) on the front panel or remote control to select “AV IN1” or “AV IN2” mode.
11