SPECIAL
Searching for television channels from the cable provider manu- ally
1Open the menu with »i«.
2Select the line »SOURCE SETUP« with »V« or »Λ« and press »●« to confirm.
– The »SOURCE SETUP« menu appears.
3Select the line »Source« with »V« or »Λ« and press »●« to confirm.
Select the option »Cable« with »<«, »>«, »V« or »Λ« and press »●« to confirm.
4Select » Digital Manual Tuning« with »V« or »Λ« and press »●« to confirm.
– The menu appears.
5Enter the
–The search starts after confirming, the channels found are displayed in the »Re- sults« menu.
6Press »i« to finish the setting.
Searching for digital terrestrial TV channels automatically
1Open the menu with »i«.
2Select the line »SOURCE SETUP« with »V« or »Λ« and press »●« to confirm.
– The »SOURCE SETUP« menu appears.
3 Select the line »Source« with »V« or »Λ« and press »●« to confirm.
Select the option »Air« with »<«, »>«, »V« or »Λ« and press »●« to confirm.
Caution:
7The antenna power supply (line »Active Antenna Power«) may only be switched on if the antenna is an active indoor antenna with a signal amplifier and it is not already
supplied with a voltage via a mains plug (or similar supply). Otherwise you may cause a short circuit and irreparably dam- age your antenna.
4Select the »Active Antenna Power« with »V« or »Λ«. Switch on the antenna power supply for the antenna with »<« or »>« (»On«).
5Select the line »Automatic Channel Search« with »V« or »Λ« and press »●« to confirm.
– The menu appears.
20.09.2010
SOURCE SETUP15:46
AUTOMATIC CHANNEL SEARCH
Connection Type | Air |
Country | U.K. |
Scan Type | ATV & DTV |
Exit
Back
Start Search