|
|
|
| |
| Specifications | |||
|
| |||
Materials | Steel housing with steel lens rings and steel, rubber supported mounting | |||
bracket | ||||
| ||||
| 7” high at the bracket (mounted/surface) | |||
Dimensions | ||||
| ||||
Voltage | 12 VDC | |||
|
| |||
Wire connectors | 6” pigtail with | |||
|
| |||
Finish | Chrome housing and hardware. Silver reflector with clear (round) glass lens | |||
|
| |||
Hardware | ||||
|
| |||
Weight | about 2 lb. | |||
|
| |||
Bulb | ||||
|
|
|
| |
|
| Save This Manual |
You will need this manual for the safety warnings and precautions, assembly, oper- ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Write the product’s serial number in the back of the manual near the assembly diagram, or write month and year of purchase if product has no serial number. Keep this manual and invoice in a safe and dry place for future reference.
SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
1.This 6” Off Road Light requires complete installation. It is important that you read the entire manual to become familiar with this product before it is installed or used. If you DO NOT have experience doing this type of electrical work, the job should be done by a qualified automotive or electrical service technician.
2.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
3.Wear
4.Make certain the vehicle’s engine is turned off and the battery is disconnected before installing.
SKU 95811 | For technical questions, please call | Page |