Operation Instructions
Start the engine, turn on the Lights by the on/off switch you installed.
INSPECTION, MAINTENANCE, AND CLEANING
1.
WARNING! Make sure the Power Switch of the Off Road Light is in its “OFF” position and that the tool is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
2.BEFORE EACH USE, inspect the general condition of the tool. Check for loose screws, cracked or broken parts, damaged electrical wiring, and any other condi- tion that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use. Do not use damaged equipment.
Maintenance Chart
Maintenance Type | Before | After | Weekly | Monthly | Every 6 | Yearly |
Use | Use | Months | ||||
Inspect Light for damage | X |
|
| X |
|
|
(see #2, above) |
|
|
|
| ||
|
|
|
|
|
| |
Wipe off with clean, moist |
| X | X |
|
| X |
cloth |
|
|
| |||
|
|
|
|
|
| |
|
|
|
|
|
|
|
Troubleshooting
Problem |
| Possible Causes |
| Probable Solutions |
Off Road Light will not | 1. | Wiring broken, frayed or | 1. | Check wiring, switch, fuse, battery |
turn on. |
| disconnected. |
| connection. If any wiring is found |
Off Road Light turns | 2. | Rubber Mounting Pads (7) have |
| to be broken, frayed or damaged in |
on but flickers off and |
| any way, replace it. | ||
| vibrated loose, causing Light |
| ||
on. |
|
|
| |
| connections to also work loose. | 2. | Check all Rubber Mounting Pads | |
|
| |||
| 3. | Bulb is burnt out. |
| (7) and all electrical connections for |
|
| tightness. | ||
|
|
|
| |
|
|
| 3. | Replace the Halogen Bulb. |
|
|
|
|
|
PLEASE READ THE FOLLOWING CAREFULLY
The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed techni- cians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.
SKU 95811 | For technical questions, please call | Page |
