Grundig 55 CLE 9170 SL manual Headphones, With an analogue TV signal, Connecting the headphones

OPERATION USING EXTERNAL DEVICES------------------------------

... with an analogue TV signal

7Suitable devices: Digital satellite receiver, DVD player/recorder, set-top box, camera

recorder­ .

7Video signal: CVBS.

7Audio signal: stereo, analogue.

7»AV2« preset.

1 Connect the »Video« socket on the

television­ to the corresponding socket of the

external­ device with an RCA cable (video signal).

2Connect the »L R« sockets on the television to the corresponding sockets of the external device with RCA cables (audio signal).

Note:

7There must not be a video signal at the »­ AV2« and »AV1/S-VHS« socket at the same time. This could lead to picture disturbances.

Using a DVD player,

DVD ­recorder, video recorder ­ or set-top box

1Switch on the external device and select the function you wish to use.

2Press » «, use »V«, »Λ«, »<« or »>« to select the preset for the input signal (»AV1«, »AV2«, »S-VHS«, »HDMI1«, »HDMI2«, »HDMI3«, »HDMI4« or »Component«) and press »OK« to confirm.

Headphones

Connecting the headphones

1Plug the headphone jack (3.5 mm ø jack plug) into the headphone socket on the tel- evision.

Changing the headphone volume

1Open the menu with »MENU«.

2Select the menu item »SOUND SETTINGS« with »V« or »Λ« and press »OK« to confirm.

–The »SOUND SETTINGS« menu appears.

4Select the line »Headphone« with »V« or »Λ«.

5Set the preferred volume with »<« and »>«.

6 Press »MENU« to end the setting.

Note:

7Prolonged listening with headphones at loud volumes can damage your hearing.

­64 ENGLISH