SMART Inter@ctive TV AND HOME NETWORK-
Manual connection
Certain networks require Static IP address. If your network requires a Static IP address, you must enter the »IP Address«, »Netmask«, »Gate- way« and »DNS« values manually. You can ob- tain your »IP Address«, »Netmask«, »Gateway« and »DNS« values from your Internet Service Provider (ISP).
1Open the menu with »MENU«.
2Select the line »CONNECTED APPS« with »V« or »Λ« and press »OK« to confirm.
– The »CONNECTED APPS« menu appears.
3Select »Connection Type« with »V« or »Λ« and then select »Wired« with »<« or »>«.
4Select »Network Configuration« with »V« or »Λ« and then select »Manual« with »<« or »>»IP«. Address«, »Netmask«, »Gateway« and–
»DNS« options are active.
|
|
| dd.mm.yyyy |
CONNECTED APPS | hh:mm | ||
| |||
inter@ctive Applications |
| OK | |
Network Settings |
|
|
|
Connection Type |
| Wired |
|
Network Configuration |
| AUTO |
|
IP Address | 10.134.151.15 | ||
DNS | 10.134.150.8 | ||
Netmask | 255.255.255.0 | ||
Gateway | 10.134.151.254 | ||
MAC Address | E1:DF:BF:92:00:11 | ||
|
| Connect |
|
Exit |
| Test Connection | |
Back |
| ||
5Select »IP Address« with »V« and press »OK«. Enter the IP address with »1…0« and press »« (green) to save the value.
6Select »DNS« with »V« and press »OK«. Enter the DNS address with »1…0« and press »« (green) to save the value.
7Select »Netmask« with »V« and press »OK«. Enter the Netmask with »1…0« and press »« (green) to save the value.
8Select »Gateway« with »V« and press »OK«. Enter the Gateway with »1…0« and press »« (green) to save the value.
9Start the registration to the home network by pressing »« (red).
–The mesage »Connecting ... Please Wait« appears.
10 Press »« (green) to make sure that the network connection is established with the current settings.
–The messages »Testing ... Please Wait« appears, after successfull announcement the messages »Connecting To Gateway: Success« and »Internet Connection: Success«.
11Press »MENU« to end the setting.