Grundig 8140 S manual Headphones, Hi-fi system/AV receiver

Page 47

OPERATION USING EXTERNAL DEVICES------------------------------

... with an analogue TV signal

7Suitable devices: Digital satellite receiver, DVD player/recorder, set-top box, camera

recorder­ .

7Video signal: FBAS.

7Audio signal: stereo, analogue.

7»AV2« preset.

1 Connect the »Video« socket on the television­ to the corresponding socket of the external­ device with an RCA cable (video signal).

2Connect the »L R« sockets on the television to the corresponding sockets of the external device with RCA cables (audio signal).

Note:

7There must not be a video signal at the »­ Video« and »S-VHS« socket at the same time. This could lead to picture disturbances.

Using a DVD player,

DVD ­recorder, video recorder ­ or set-top box

1Switch on the external device and select the function you wish to use.

2Press » «, use »V«, »Λ«, »<« or »>« to select the preset for the input signal (»AV1«, »AV2«, »S-VHS«, »HDMI1«, »HDMI2«, »HDMI3«, »HDMI4« or »Component«) and press »OK« to confirm.

Headphones

Connecting the headphones

1Plug the headphone jack (3.5 mm ø jack plug) into the headphone socket on the right side of the television.

Changing the headphone volume

1Open the menu with »MENU«.

2Select the menu item »SOUND SETTINGS« with »V« or »Λ« and press »OK« to con- firm.

The »SOUND SETTINGS« menu ap- pears.

3Select the line »Headphone« with »V« or »Λ«.

4Set the preferred volume with »<« and »>«.

5 Press »MENU« to end the setting.

Note:

7Prolonged listening with headphones at loud volumes can damage your hearing.

Hi-fi system/AV receiver

Connecting the hi-fi system/­ AV receiver

1Connect the »Optical Out« socket on the television to the corresponding socket of the device with an optical digital cable (digital audio signal);

or

connect the »SPDIF« socket on the television to the corresponding socket of the AV receiv- er with an RCA cable (digital audio signal).

Setting the audio format

You can select whether the audio signal out- put via the »Optical Out« or »SPDIF« socket should be in the PCM or AC2 format.

1Open the menu with »MENU«.

2Select the menu item »SOUND SETTINGS« with »V« or »Λ« and press »OK« to con- firm.

– The »SOUND SETTINGS« menu appears.

3Select »Audio Output Setup« with »V« or »Λ« and press »OK« to confirm.

– The menu appears.

4Select the »SPDIF output« with »V« or »Λ«.

5Select the preferred audio format (»PCM« or »Dolby* D«) with »<« or »>«.

Note:

7If you wish to output the audio only via a multi-channel amplifier/AV receiver, set the option »TV Speaker« to »Off« in the menu.

6Press »MENU« to end the setting.

ENGLISH 47­

Image 47
Contents LCD TV ­2 English English ­3 Special settingsLNB settings Settings for motorised antennas DiSEqC Operation with a Common Interface­4 English English ­5 ­6 English Special features of your ­television setGeneral information You can record any digital TV channels you chooseEnglish ­7 Receiving digital channelsImportant notes on environmental protection Antenna­ socket »SATELLITE« on the televi- sion set And/or Connecting the antenna and power cordPlug the power cord into a wall socket Connection and preparationEnglish ­9 Inserting batteries into the ­remote controlEnvironmental note ­10 English Connections on the television setPb Pr Optical OutEnglish ­11 Controls on the television setPC Audio Video­12 English Remote control Main functionsNavigation in the menus English ­13 Remote control ­All functions Help Initial set-up and tuning ­television channelsSelecting language, country and operating mode Various settingsEnglish ­15 Tuning the television channels from satellite DVB-SEasy installation Advanced installation­16 English English ­17 Tuning terrestrial television channels DVB-TTuning television channels from the cable provider DVB-C Select the »Active Antenna Power« with »V« or »Λ«­18 English Changing the program table for the digital channelsSelecting channel lists Skipping channels Creating lists of favouritesSorting channels in the favourite list Deleting channels­20 English Picture settingsSetting­ on the right side As from DVB-T receivers or DVD players­Sound settings Equalizer Exiting the settingSoundeffects SRS TruSurround XTBasic functions Electronic TV guide Eco modeZoom function Zapping functionChanging the picture format ­26 English Possible limitations when using an external data mediumInformation on recording and playing television programmes Grundig has no influence on ­ these restrictionsFor example, external hard disks Connecting external data mediaSettings for USB recording Selecting the menuSelecting a partition on the external data medium Switching on automatic previewTesting the external data medium Selecting external data mediaEnglish ­29 ″Pausing time shift ­ programmesRecording programmes One-touch programme recording­30 English Presetting programmes to be recordedUsing the electronic TV guide Recording a programme from the channel listEnglish ­31 Editing recording data in the ­ timer menuDeleting a timer By manual data entryDeleting programmes in the recording list PlaybackImage data File formatsVideo data Audio data­34 English Connecting external ­ data media»USB« socket of the television set Devices­ in EN 55022/EN 55024 is not possibleFile browser Settings in the USB ­ setup menu­36 English Switch to the folder/file list with »OK«Basic playback functions Additional playback ­ functions Additional functions TOP text or Flof text modeLanguage settings Opening the Settings menuSwitch-on timer Setting the date and timeTimer settings Entering the switch-off time ­ sleep timerParental control settings Locking television channels Restoring the television to the default settingsUpdating software Convenience functions Changing the PIN codeDigi Link functions on your television ­44 English Switching the device to standby Device operation English ­45 High definition ­HD ready Connection optionsThis ensures that you can view digital Hdtv Connecting external devices Hi-fi system/AV receiver Headphones­48 English Playing the audio signal via the ­ HiFi systemEnglish ­49 Connecting a PCSelecting presets for the PC Settings for PC mode­50 English What is a Common Interface?Access control for CI module and smart card Inserting the CA moduleEnglish ­51 Be changed LNB settings­52 English English ­53 Settings for motorised antennas DiSEqCUser mode Received­ with »«, »«, »V« or »Λ« and press »OK« to confirm­54 English Expert modeEnglish ­55 Searching for digital terrestrial TV channels automaticallyScan is complete as soon as Searching for digital terrestrial TV channels manually Tuning analogue television channels­Switching the television to ­analogue reception Setting all analogue television channelsEnglish ­57 PresetTo select the preferred setting­ ­58 English Changing stored analogue channels­Selecting a channel list English ­59 Exiting the settingsEntering channel names 8 digit maximum Skipping television channels­60 English Displaying signal informationFor digital channels only Open the menu with »MENU« English ­61 Technical data­62 English Service information for retailersEnvironmental note RecycledEnglish ­63 Troubleshooting