Grundig 8140 S manual Changing stored analogue channels­, Selecting a channel list, ­58 English

Special settings----------------------------------------------------------------------------------------------------------

7If fine tuning is necessary, select the line »Fine Tuning« with »V« or »Λ« and use »<« or »>« to make the setting.

7Press »« (blue) to save the setting. Note:

7 If you wish to remedy other television channels, repeat steps 4 to 8.

8Press »MENU« to end the setting.

Changing stored analogue channels­

If channels were stored with the automatic chan- nel search while tuning the television channels, you can delete them. You can also store chan- nels in a different preset, change or enter the name of a channel as well as skip channels.

Selecting a channel list

Note:

7Analogue channels can be selected if the option »Air« or »Cable« has been selected.

1Open the menu with »MENU«.

2Select the line »SOURCE SETUP« with »V« or »Λ« and press »OK« to confirm.

– The »SOURCE SETUP« menu appears.

3Select the line »Program Table« with »V« or »Λ« and press »OK« to confirm.

– The »PROGRAME TABLE« menu appears.

Note:

7Additional operations are explained in the following sections.

Deleting channels

1In the »PROGRAME TABLE« menu, select the television channel to be deleted with »V «, »Λ«, »<« or »>« and press »« (red) to con- firm.

2Press »« (yellow) to confirm the deletion process.

Note:

7»« (blue) allows all television channels to be deleted.

3Press »« (green) to confirm the deletion process.

­58 ENGLISH