Haier HL22R1, HLC22R1, HLC19K1, HLC19R1, HL22F1 VCR Setup, Hdmi Input, How to connect, How to use

Connection Instructions

VCR Setup

-To avoid picture noise (interference), leave an adequate distance between the VCR and TV

Connection and use steps:

1.Read the user guide supplied with your AV devices and ensure that it has Composite or S-Video connectors;

2.Make sure that the power of the LCD-TV and the AV device are off;

Connection Option 1

Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

Connection Option 2

1.Connect the audio and video cables from the VCR's output jacks to the TV input jacks, as shown in the figure.

When connecting the TV to VCR, match
the jack colors (Video = yellow, Audio
Left = white,and Audio Right = red).
If you connect an S-VIDEO output from	1
VCR to the S-VIDEO input, the picture
quality is improved; compared to conne-
cting a regular VCR to the Video input.	2
2. Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner s
manual.)
.
3.Turn on the LCD-TV first ; and then turn on the
power of the AV device;

4.Press t INPUT button to set the video input mode of the LCD-TV to S-Video mode or Video mode.

		ATN IN
	Pr
COMPONENT IN	PbY	R-AUDIO-L S-VIDEO
		IN
		R-AUDIO
		IN-L
		VIDEO

VCR

HDMI Input

How to connect

Connect the cables from the external equipment's output jacks to the TV input jacks, as shown in the figure.

How to use

1.Select the input source by using INPUT button on the remote control or on the TV.

2.Operate the corresponding external equipment. Refer to external equipment operating guide.

HDMI

HDMI