Menu Operations
Function Menu Options
1.Press MENU button and 
/ 
until the following menu appears on the screen.
Video | Language | English | |
OSD Timeout | Short | ||
| |||
Audio | OSD Transparency | Middle | |
Channel | Screen Mode | Full screen | |
Blue Screen | On | ||
Function | DPMS | On | |
Time Setup |
| ||
Lock | Closed Caption |
| |
| Default |
|
Function
CH+/- VOL+/-
Select EXIT Back
2.Press 
/ENTER button to enter the Function menu and 
/ 
to go up and down to select the desired option .
3.Press 
/ENTER button to confirm and 
/ 
increase and decrease the level to adjust the selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved .
Function:
Language: Press 
/ 
button to select language of the OSD.
OSD Timeout: Press
/ 
to select Middle, Short and Long to change the time of the OSD display.
OSD Transparency: Press 
/ 
to select among Low, High and Middle to change the transparency of the OSD. To select Low, the OSD is opacity.
Screen Mode: Press 
/ 
to select among Full Screen, Normal, Wide, Zoom and Cinema to change the display mode. ( display mode may differ from different inputs)
Blue Screen: Press 
/ 
to select On , the screen will be in blue after 3 seconds if there is no signal.
DPMS: PC Power Management. To set On, the set will be in standby mode automatically if no signal in 2 minutes; if signal input , the set will be on again automatically.
Time Setup: Press 
/ENTER to enter the submenu.
Time Zone: Press 
/ 
to select the appropriate time zone.