DVD System Setup

Screen Saver Off

General Setup Process

1.Press the setup button, the general set up page will be displayed press twice the preference page will be displayed

2.Press	or	to select, the
item, then press		to enter the
submenu.

3.Press or to select then press PLAY/ENTER to confirm.

4.Press SETUP repeatedly to exit the set-up menus.

NOTE: Preference page will be displayed when there is no DVD in the unit.

..General Setup Page..

Tv Display	LB	4	3/Ps
Angle Mark	On	4	3/Lb
Osd Lang	ENG 16		9
Caption	On

Screen Saver Off

	..Preference Page..
	Parental	1 Kid Saf
	Password	2 G
	Password	3 Pg
	Default	3 Pg
	Default	4 Pg 13
		5 Pgr
		6 R
		7 Nc17
		8 Adult

SETUP

PLAY/ENTER

SETUP

PLAY/ENTER

General Setup Page

ASPECT RATIO DESCRIPTION

When using the DVD with the internal TV,

select 4 3/LB.

The following information applies only	..General Setup Page..
when the DVD output is connected to an Tv Display		LB	4	3/Ps
external TV.	Angle Mark	On	4	3/Lb
external TV.	Osd Lang	ENG16		9
	Osd Lang	ENG16		9
	Caption	On

4:3/PS (PS = Pan and Scan)

You may select if you have a normal aspect ratio (4:3) TV, although the NORMAL/LB (letter box) is a more common choice. In PS

mode, widescreen material will fill the screen, but at the expense of chopping off extreme left and right edges of the original film picture. For this feature to work, the disc must be specially coded. Such discs are uncommon.

4:3/LB (LB = Letter Box)

You may select this if you have a normal aspect ratio (4:3) TV. Widescreen material will be shown in pure unaltered form, allowing the entire picture area of the original film to be viewed without any side cropping. Black bars will appear above and below the picture.

16:9

You may select this if you have a widescreen (16:9) TV. Back bars may still appear above and below the picture even if using a widescreen TV. This is because some film directors prefer to use ultra widescreen aspect ratios e.g. 2.35:1. This will normally be indicated on the DVD packaging.