Menu Operations
Setup Menu Options
1.Press MENU button and CH+/CH- until the following menu appears on the screen.
| Tuning Band | Air | |
Picture | DTV Signal |
| |
| Auto Ch Search |
| |
Audio | Add On Ch Search |
| |
Manual Ch Set |
| ||
|
| ||
Setup | Channel Label |
| |
Menu Language | English | ||
| |||
| Reset |
| |
Feature | Move /OK Select | Menu Exit |
2.Press VOL+/OK button to enter the Setup menu and CH+/CH- to go up and down to select the desired option .
3.Press VOL+/OK button to confirm and VOL+/VOL- increase and decrease the level to adjust the selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved .
Function:
Tuning Band: Press VOL+/OK button to select Cable Auto, Air, Cable, Cable HRC, Cable IRC.
DTV Signal: Shows the signal strength of the reception.
Auto Ch Search: Press CH+/CH- button to select the item. Then press VOL+/ OK button to enter your selection and scan. All channels now available will be automatically preset in order .After the search has finished, the first program number will display on the screen. This search automatically adds only the active channels in your area to the TV's memory. It deletes any channels on which there is no broadcast or a poor signal. The channels found are automatically saved as below:
Auto program Menu
NTSC Channel 19 | Not Found | ||
Analog Channels Found |
| ||
2 | |||
Digital Channels Found |
| ||
0 | |||
Progress(%) | 12 |
|
|
|
| ||
| Menu Stop |
| |
Note: The TV searches channels in analog first and then searches channels in digital signal ,which may take up to few minutes.