Haier HLC1 user manual Channel Menu Options

Menu Operations

Adjust Menu Options Continued

Functions:

AUTO CONFIG : Automatically adjusts picture location frequency and phase parameters .

PHASE : Removes any horizontal distortion and clears or sharpens the displayed characters .

CLOCK : Adjust the TFT-LCD to match the PC input source clock frequency

H POSITION : Picture horizontal position adjust

V POSITION : Picture vertical position adjust .

Channel Menu Options

1.Press MENU and VOL+/VOL- button until the following menu appears on the screen

	CHANNEL
CH NO.		11.1
NAME
TUNER		CABLE
SKIP		OFF
AFC		ON
FINE TUNE
AUTO SCAN
	63.25MHZ

Only available in analog signal

Note: This menu appears only in TV mode .

2.Press CH+/CH- button to enter the channel menu and to go up and down to select the desired option .

3.Press VOL+/VOL- button to increase and decrease the level to adjust the selected option to your preference .

4.Repeat step 2 and step 3 until desired settings have been achieved .

Functions:

1.CH NO. : Press VOL+/VOL-to go up and down to set the channel number. The display will show the current playing channel.

2.NAME: Allows you change the name of the channels in analog signal. And display the channel name automatically in digital signal.