Installation
External Equipment Connections
NOTE: All cables shown are not included with the TV.
Choose Your Connection
There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some different ways to connect your TV with different input sources.
Connecting a VCR
To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
Connection Option 1
Set VCR output switch to channel 3 or 4 and then tune the TV to the same channel number.
Connection Option 2
1.Connect the audio and video cables from the VCR's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to VCR, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). If you connect a
2.Insert a video tape into the VCR and press PLAY on
the VCR. (Refer to the VCR owner`s manual.)
3.Select the input source with using the INPUT button on the remote control, and then press 
/ 
button to select the source,
press ENTER button to confirm.
VIDEO IN COMPONENT IN OPTICAL OUT
|
|
|
| L |
|
2 |
|
|
| DVI AUDIO |
|
|
|
|
|
| |
|
|
|
| R |
|
1 |
|
|
|
|
|
Y | Pb | Pr | L AUDIO R | VGA AUDIO | VGA |
1 |
|
|
|
|
|
VIDEO | L AUDIO R | S VIDEO L AUDIO R | L AUDIO R | ||
2
AV OUT VGA IN HDMI INANT IN
10 TV