Audio Right = red).
BSelect the input source by using the INPUT button on the remote control or on the TV.
CSelect your desired channel with the remote control for cable box.
VIDEO | L | L | R | AUDIO OUT | ANT IN |
AV IN |
|
|
|
|
Operation
CWhen finished using the TV, press POWER button on the remote control. The TV reverts to standby mode.
DIf you intend to be away on vacation, disconnect the power plug from the wall power outlet.
Note
RIf the TV in power on , the screen show information according the type of input signal, the information
will disappear. If there is no signal, “No Signal” will display on the screen.
HDMI input
How To Connect
Connect the cables from the external equipment's output jacks to the TV input jacks, as shown in the figure.
How To Use
ASelect the input source by using INPUT button on the remote control or on the TV.
BOperate the corresponding external equipment. Refer to external equipment operating guide.
Operation
In the manual, the OSD (on screen display) may be different from your TV’s, because it is just an example to help you with the TV operation.
There are several options you might need to set up in order for your TV to work properly. Read the instructions that follow.
Switching On/Off the TV set
AFirst, connect power cord correctly.
BSelect the viewing source by using INPUT button on the remote control.
Choose the Menu Language
When you start using your set for the first time, you must select the language which will be used for displaying menus and indications.
AChoose TV Input and then press MENU button.
BPress CH+/- button to select Function menu.
CPressVOL+ or ENTER button and then use CH+/- button to select Language.
DPress VOL+/- button to select language. ( English, Spanish or French)
Video | Language | English | |
OSD Timeout | Short | ||
| |||
Audio | OSD Transparency | Middle | |
| DPMS | On | |
Channel | Blue Screen | On | |
| DCR | On | |
Function | Time Setup |
| |
Lock | Closed Caption |
| |
Default |
| ||
|
| ||
Function | CH+/- | Select EXIT Back | |
VOL+/- |
Choose the Input source
Change the picture source so you can watch your TV, VCR, DVD, Cable , or any other devices that are connected to your TV.
APress INPUT button to enter the Select Source menu and then use CH+/- button to select the desired items (TV, composite, Component, PC, HDMI).
BPress ENTER button to confirm .
Haier LED HDTV |