Haier HL19SLW2, HL22XSL2, HL22XSLW2 Channel Menu Options, SAP Broadcasts Setup, Is still normal

Operation

Video	Balance		0
Audio	Bass		50
	Treble		50
Channel	Sound Surround		On
	Equalizer		Off
Function	Speaker		Off
	SPDIF Type		Off
Lock	AVL		Off
	Audio Only
Audio		ENTER Adjust VOL+/CH+/- - Select (;,7 Back

BPress VOL+/ ENTER button to enter the menu and CH+/- button to go up and down to select the desired option.

CPress VOL+/ ENTER button to confirm and CH+/- button increase and decrease the level to adjust the selected option to your preference.

DRepeat step 2 and step 3 until desired audio quality has been achieved.

Function

Y Balance:PressCH+/- button and VOL+/ENTER to confirm, then pressVOL+/- to adjust the audio output between left and right speakers.

Y Bass:Press CH+/- button and VOL+/ENTER button

to confirm, then pressVOL+/- to increase or decrease the level of the lower-pitched sounds.

YTreble:PressCH+/-CH+/-button and VOL+/ ENTER to confirm, then pressVOL+/- to increase or decrease the level of the higher-pitched sounds.

YSound surround: To turn the simulated surround sound on or off.

YEqualizer: To adjust the equalizer Off /Rock /Pop /Live /Dance/ Techno /Classic and Soft.

YSpeaker: To adjust the speaker on or off.

YSPDIF Type: To adjust the SPDIF output: Off /Dolby Digital and PCM.

YAVL: This will reduces the differences in volume level among broadcasters.

YAudio Only: Press VOL+/ENTER button to confirm, the following display will appear on the screen:

Press VOL- to select OK, then press OK to confirm. The TV screen will be black and no picture , but the sound

is still normal.

If enter Audio Only mode, press POWER to exit!

OK Cancel

You can press POWER button to reveal the picture on the screen.

SAP Broadcasts Setup

This TV can receive MTS stereo programs and SAP (Secondary Audio Program) that accompanies the stereo program; if the station transmits an additional sound signal as well as the original one.

When having selected SAP button on the remote control, this TV can only receive the signal when the TV station transmits the proper signals.

Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected.

Select Mono if you want to listen to mono sound during stereo/SAP broadcasting.

Stereo or SAP can be received in a Analog channel.

AUse the SAP button to select your desired MTS mode in a analog signal. Each time you press the SAP button, Mono, Stereoor SAP appear. If other languages are available on the digital signal, select them with the SAP button.

BPress EXIT button to save and return to TV viewing.

Channel Menu Options

Channel menu will appear in main menu only in TV mode.

APress MENU button and CH+/- button until the following menu appears on the screen.

Video	Tuner Mode	Antenna
Audio	Channel Scan
	Channel Skip
	Channel Labels
Channel
	Time Shifting Mode	On

Function

Lock

Channel	CH+/-	Select EXIT Back
	VOL+/-

Haier LED HDTV EN-12