Settings, Connecting to a Wired Network | Haier LE47H5000 instruction

Basic Receiving and Playing Operations

Settings

5IF.PEFN1PSUPOUIF8BMM&YUFSOBM.PEFN "%4-7%4-$BCMF

APress button to enter Cloud interface.

BPress 34button to select Settings. Press OK to enter.

CPressbutton to select the item which require to be adjusted.

.PEFN$BCMF OPUTVQQMJFE

#BDLPG57

LAN

-"/$BCMF OPUTVQQMJFE

3PVUFS

Connecting to a Wired Network

APress button to select Ethernet, press OK to enter.

BPress 56 button to select DHCP item, then press Save button, it will automatically finished.

You can set up your TV to access the Internet through your local area network (LAN) using a wired or wireless connection.

Connecting to a Wired Network. You can attach your TV to your LAN using a cable (cable not included) in three ways:

•You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat 5 cable. See the diagram below:

5IF.PEFN1PSUPOUIF8BMM&YUFSOBM.PEFN "%4-7%4-$BCMF57

	.PEFN$BCMF OPUTVQQMJFE
#BDLPG57		-"/$BCMF
		-"/$BCMF
		OPUTVQQMJFE
		OPUTVQQMJFE

LAN

•You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a router. which is connected to an external modem. Use a Cat

5 cable for the connection. See the diagram below:

-"/$BCMF OPUTVQQMJFE

•Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a Cat 5 cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house.

5IF.PEFN1PSUPOUIF8BMM

#BDLPG57

LAN

-"/$BCMF OPUTVQQMJFE

Note

The terminals (the position of the port and the type) of the external device may be different depending on the manufacturer.

If the IP address allocation by the DHCP server has failed, turn the external modem off, turn it on again after at least 10 seconds and then try again.

For the connections between the external modem and the router, refer to the owner’s manual of the corresponding product.

You can connect the TV to the LAN directly without connecting it through a router.

You cannot use a manual-connection-type ADSL modem because it does not support DHCP. You have to use an automatic connection-type ADSL modem.

Connecting to a Wireless Network

APress button to select WI-Fi, press OK to enter, To see available networks, turn Wi-Fi On.

BPress 56 button to select Wireless Setting item,press OK button to enter.

CPress 56 button to select the network you need

LED Backlit Flat TV Instruction Manual EN-20