Operation, VGA Setting, Audio menu, Option menu

In this menu, you can adjust the picture options here,

such as contrast, brightness, etc.

Press to select, press ENTER to adjust.

Note:

1)If you want to adjust contrast, brightness, color, and sharpness, the picture mode must be set to personal.

2)This will increase or decrease Warm (red) and Cool (blue) colors to suit your personal preference.

Select Cool to give the white colors a blue tint, Normal to give the white colors a neutral tint, Warm to give the white colors a red tint.

Standard mode is the default setting, if you select some other options, the power consumption may change.

1.1 VGA Setting

When a PC is connected, you can adjust the VGA settings.

1)H-Pos: Adjust the horizontal position of the screen.

2)V-Pos: Adjust the vertical position of the screen.

3)Clock: Fine tune the screen width.

4)Phase: Fine tune the phase of the screen. Usually you don't adjust this item.

5)Auto: Auto adjust to fit the screen.

VGA Setting

H-Pos

V-Pos

Clock

Phase

Auto

In this menu, you can ajust the sound options here.

Press to select, press ENTER to adjust.

Note:

1)Audio language is available in ATSC/TVmode only.

2)Auto volume is available only when the input signal volume is too large or there is distortion.

In this menu, you can adjust the sleep timer, time zone,

etc. Press to select, press ENTER to adjust.

Note:

1)Time zone, DST (Daylight Saving Time) and the clock are available in ATSC mode only, and the Clock can't be adjusted.

In this menu, you can adjust the Menu language, Closed Caption, Restore Default etc.

Press to select, press ENTER to adjust.

CC Mode

CC Off

Basic Selection CC1

Advanced Selection Servicel

Option

-11-