Remote Control
Installing Batteries
1.Slide open the cover of the battery compartment on the back of the remote control.
2.Load two AAA alkaline batteries in the compartment. (plus and minus poles to respective mark)
3.Replace the cover of the battery compartment.
-
+
Precautions
Make sure that there is no obstacle between the remote controller and television set.
Keep the remote control away from heat sources or humid areas to ensure effective performance of the remote.
As strong light may interfere with the signals, change your position to operate the remote control if
the television cannot be turned on or off as expected.
Make sure that two AAA alkaline batteries are loaded. The batteries must be of the same type, must be inserted properly, and must not be rechargeable.