Basic Operation Instruction
Move: After select channel, press "2" key on the remote control, then press ''Up/Down'' key on the remote control to select position where you wish place, then press "MENU" key on the remote control to return.
Skip: Press ''Up/Down'' key on the remote control to select channel, press ''3'' key on the remote control to open or close "Skip".
Select Channels with "CH+/CH-" Key
Press ''Channel'' key on the remote control or
Select channels with the Return key you can go to the last channel when pressing the Return key. For example, if the last channel is 10 and the current channel is 20, you will go to channel 10 when pressing the Return key. You can switch the two favourite channels as you like.
Select Channels with Numeric Keys
1.Operations to select channels with 1 digit:
Press the number keys on the remote control to select TV channel directly.
2.Operations to select channels with 2 digits:
Press the number keys with 2 digits on the remote control to select TV channels.
3.Operations to select channels with 3 digits:
Press the number keys with 3 digits on the remote control to select TV channels.
HOTEL MODE | ON |
CH LOCK | OFF |
MAX VOL | 100 |
AUTO SET | ON |
PICTURE MODE | STANDARD |
POWER VOL | 30 |
POWER SOURCE | TV |
CH NUMBER | 1 |
KEY LOCK | OFF |
LOCK CH NUM | 1 |
LOCK | OFF |
CLONE |
|
Hotel Function(optional)
Press "MENU" key on the remote control to display the main TV menu, and then press "4578" on the remote control to display the hotel function menu. Press "Up/Down" key to enter into the menu and select the item which you need to adjust, and then press "Left/ Right" key to adjust the value or state.
Note: With the mode of AV, YPbPr, PC, HDMI, all functions and adjustments are similar
with TV. User can check it at convenience. HDMI connector can realize DVI connector
function with external HDMI/DVI commutator.
USB Signal Source Operation
Please insert USB memory card into USB interface of TV, press "source" key on the remote control or control panel to select USB signal source, press "OK" key to enter.
Note:
①USB function support file format with video file/sound file/graphic file/text file. For some nonstandard USB storage devices, may appear condition of unable recognize, please replace the
standard USB storage device.
②Streaming media system to play a file for each format has certain limitations, if more than the
system limit, then play will be wrong
③Do not pull up USB storage devices when system playing, this may result in system or equipment problems
④The system supports USB1.1 and USB2.0 connector, the standard transport protocol such as U disk and removable hard disk storage devices. USB devices file format must be FAT or FAT32, does not support NTFS.
12