Installation & Connection
Power Connection
Plug one end of the power cord into the input port of the machine's power supply and then insert the other end into the socket of the electrical source (AC
Notes:
1.When connecting the power cord, be sure to turn off the machine and other equipment's power.
2.If a long time at leisure, please disconnect it from power supply
3.This TV must be connected to a three pin socket outlet for safety.
Computer Connection
Please connect one end of VGA cord with the output port of the computer (available for both desktop or laptop computer), and another end of VGA cord with the input port of the VGA on its rear cover.
YYellow (VIDEO)
W
RRed
GGreen (Y)
BBlue (Pb/Cb)
USB
R
HDMI Digital Port Connection
Connect external HDMI high signal source to HDMI digital input port of this machine through HDMI digital connector cable; push"SOURCE" button to select HDMI signal source. (Specific HDMI interface amount in accordance with work order.)
AV Video Signal Connection
Through composite cable, connect AV equipment VIDEO output termination to this machine VIDEO input, and AV equipment AUDIO output termination to this machine AUDIO input, respectively.
AV Output Connection
Use the audio/video cable to connect the TV audio/ video output interface to another monitor to watch the TV programs synchronously.
YPbPr/YCbCr Input Connection
If the signal source is DVD, Digital wired receiver
or equipments with the YPbPr/YCbCr output, recommends you to connect YPbPr or YCbCr
output with the TV YPbPr/YCbCr input. In order to obtains the better picture
quality, at the same time, please connect its audio output with TV audio input as shown in the following chart. If you choose the YPbPr/YCbCr signal, please
set signal source selection under YPbPr pattern.
W
Y
R
W
R
B
G
6