Audio Setup, Timer Setup | Haier HTN20R16 specs

Menu Functions (Continued)

Audio Setup:

By pressing MENU button ,and then pressing VOL(-/+) buttons it will bring you to Audio Setup display. You will see the following menu on your TV screen:

Audio
Volume	45

Follow the procedure below to adjust the sound quality:

Press VOL (+) button to increase and VOL (-)button to decrease the level to your preference.

Timer Setup:

By pressing MENU button ,and then pressing VOL(-/+) buttons it will bring you to Timer Setup display. You will see the following menu on your TV screen:

Timer
Clock	17:18
Time-on	18:00
Ch. Select	1
Time-off	--:--
Sleep Time	0
Remind Time	--:--
Ch. Switch	1

Follow the procedure below to select one of the above options: 1.Press the CH(+) and CH(-) button to go up and down the menu. 2.Press VOL (+) button or VOL (-) button to select your preference.

Clock:	Press VOL (-/+) buttons for HOURS and VOL(-/+) buttons for MINUTES
	adjustment.
Time-On:	Press VOL(-/+) buttons for HOURS and VOL (-/+) buttons for
	MINUTES adjustment. This feature works like an alarm clock. Your
	TV will turn on at the set time.
Ch. Select:	This feature switches you to your favorite channel at the set time.
	Press VOL(+) and VOL(-) buttons to select the channel.
Time-Off :	Press VOL (+/-) buttons for HOURS and VOL (+/-) buttons for
	MINUTES adjustment. This feature works like an alarm clock. Your TV
	will turn off at the set time.
Sleep Time:	This feature allows you to turn off the television after a pre-selected

number of minutes (180, 170,160, ........,10 and 0).

Remind Time: Press VOL(+/-) buttons to set HOURS of attention and VOL (+/-) buttons to set MINUTES of attention. You will see the flashing time on your TV when the reminder time arrives. Note: This exclusive feature can remind you of important tasks when watching TV.

Ch. Switch: This feature lets you store your favorite channel. Once you store the channel number in this function, when the set time is up, it will switch over to the set channel. This feature is used with the Exchange feature. Press VOL(+) or VOL(-) button to select the channel.