Basic Receiving and Playing Operations
❖❖ Auto Adjust
Vertical and Horizontal position of picture can be adjusted in this item.
❖❖ Clock
This is used for adjusting the phase of pixel clock in PC mode.
❖❖ Phase
This is used for adjusting H Position and V Position as well as relative parameters in PC modes.
❖❖ Reset
Return to factory default settings.
Lock Setup
The television has the function of security default lock. Password needs to be entered when the program lock mode is to be set.
How to use the password function
Press H. LOCK, the TV screen will display Enter Password to prompt the user to enter a correct password by pressing corresponding numerical keys; if the password is correct, the user enters the Lock Set menu; if incorrect, the user is required to enter a password again.
If there is no operation for a few seconds, the display will automatically disappear.
The Lock Set menu is as follows:
menu |
|
|
Change Password |
|
|
Tuning Lock | off | |
Peset Source | off | |
Preset CH | off | |
Source Lock |
|
|
Child Lock | off | |
Max Volume |
| 100 |
| ||
| ||
On Volume |
| 0 |
| ||
| ||
Unlock |
|
|
|
|
|
❖❖ To set new password
After entering the Lock Set menu, press 5/6 to select the Change Password option, and then press 3/4 to display the Change Password menu, afterwards enter a new
change of password.
If the user does not want to change the password in halfway, he may press MENU to exit from this menu.
Note
The initial password is 0000, and the password setting will not be changed after executing the Unlock option.
❖❖ Tuning Lock
Press 5/6 to select the Tuning Lock option, and then press 3/4 to set ON or OFF.
(If set ON, the Tuning Menu is not available in TV mode. To make any operation related to the Tuning Menu, it is necessary to enter the Lock Set menu to set Tuning Lock OFF or execute the Unlock option.)
❖❖ Preset Source Setting
Preset Source may be set as Off, TV, AV,Component, HDMI, PC and USB. When the Preset Source is set as TV, after entering the Preset Channel menu, press
3/4 to select the preset channel, and the channel will be forcibly switched to the preset one upon turning the TV on; when the Preset Source is set as other signal sources, the TV will be forcibly switched to the preset source upon turning on. For example, when the Preset Source is set as YPbPr/YCbCr, the TV will be switched to YPbPr/YCbCr upon turning on; when set as OFF, the preset function will be closed.
❖❖ Preset Channel Setting
Only when the Preset Source is set as TV can the Preset Channel option be available. Press 3/4 to select preset channels from
❖❖ Source Lock
This function is used to prohibit watching a program from various external inputs, e.g. AV and PC, etc. Press 5/6 to select a certain option, and then press 3/4 to set an external input lock ON or OFF. If an external input lock is set ON, after entering this mode, the screen will display blue background with muting and a prompt Source Lock; during Source Lock prompt, Source Lock will remain if there is no other display on the screen. To watch a program from a locked external input, just enter Source Lock submenu to set corresponding status as OFF or execute the Unlock option in the Lock Set menu.
❖❖ Child Lock Setting
Press 5/6 to select the Child Lock option, and then press 3/4 to set ON or OFF. If set ON, this control key will not respond, and the screen will display Child Lock when the key is pressed; if no other operation is made, the display will automatically disappear later.
20 TFT