Streaming Media Playing System, Max Volume Setting

Basic Receiving and Playing Operations

To resume Child Lock function, just enter the Lock Set menu to set Child Lock OFF or execute the Unlock option.

❖❖ Max Volume Setting

Press 5/6 to select the Max Volume option, and then press 3/4 to freely adjust the max volume within the range of 0~100. After finishing the setting, the max volume in the Volume menu will not exceed the preset max volume; for example, if the preset max volume is 30, the volume in the Volume menu can not be increased any longer upon reaching 30; if the preset max volume is less than the value in the Volume menu, the latter will decrease along with the

decrease of preset max volume.

❖❖ On Volume

Press 5/6 to select the Power on Volume option, and then press 3/4 to freely adjust the volume

within the range of 0~100.

❖❖ Unlock Setting

Press 5/6 to select the Unlock option, and then press 4 to clear all the lock settings, namely set all the lock setting options as OFF; the Preset Channel is set as OFF and max volume returns to 100 (except

password).

Streaming Media Playing System

Note

RR The diagrams in the following section are schematic and only for your reference. Please see the actual product if necessary.

ASupported file formats:

•• Picture: *. JPEG;

•• Music: *. Mp3(8-320kbps; WMA(32-192kbps); AAC(16-576kbps)

•• Movie:

MPEG4: *. avi files in accordance with Div*4. x/5. x Protocol;

MPEG2: some *. mpeg files;

MPEG1: *. dat and some *. mpeg files; RealVideo

•• Text: *. Txt.

Note

RR Due to the particularity of file coding, some files may be unable to be read.

BSupported equipment:

Support the equipment that supports Mass Storage Protocol and whose file system is FAT/NTFS/FAT16/ FAT32, such as some USB disks, mobile hard disks, card readers, MP3 players and digital cameras.

If USB equipment could not be identified due to unsupported file system, please format the equipment to the above-mentioned file system;

CThe external card reader supports most of the digital cards in the current market; the types of digital cards that can be read are relevant to the performance of selected card reader; you may attach standard mobile hard disks (working voltage 5.0V, working current not higher than 500mA); during media playing, do not pull out storage media, otherwise it may cause system halt, damage the files in storage media or damage USB equipment; sometimes, the TV may halt due to overhigh information error rate, in which case you should restart the system; there are a lot of nonstandard USB mobile equipment

in the market, they may not be identified when connected to the streaming media playing system; the above phenomena may also occur on computers and are not the TV’s fault.

DTo achieve smooth playing, ensure the following:

•• The file code rate should be lower than 300KB/S;

•• Due to the limitation of USB signal transmission distance, it is recommended not to use USB patch cord, in case of using the cord, make sure that its length is not over 1m;

•• Use high-speed USB equipment in conformity with USB2.0 Interface Standard; if USB equipment in conformity with USB1.1 Interface Standard is used, the playing may be unsmooth.

EAlthough many movie files are with such postfixes as avi and mpeg, actually there are several formats in the files; however, the TV can only play some files in avi and mpeg formats. Some files with the postfix "dat" are not movie files, but data files commonly used in computers, and they can not be played as movies.

Start/Exit Streaming Media Playing System

APress USB on the remote control unit to select the streaming media function.

BInsert USB equipment into corresponding USB interface 2s after starting the system.

CAfter entering the system menu, press 3/4 on

TFT -LCD television Owner’s Manual 21