NOTE
The wall mount bracket and the screws are not included.
Please make sure to connect the power plug to the wall outlet socket after connecting the TV to the power cord!
3. Remote control:
Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V).
(power cord)
1. Install the base stand; place the
TV on a solid surface.
Min 1 m
4. Power:
English
Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover.
To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity.
Avoid heat, direct sunlight and exposure to rain or water.The equipment shall not be exposed to dripping or splashing.
2.Connect the antenna cable or CATV cable to the aerial socket ANT IN 75Ω at the back of the TV set.
Insert the power cord in the wall socket with AC power supply.
5.Turn the TV on:
Press the Power key on the remote control or the power button on the control panel on the side of the TV.
Power Key
11