Haier LT22R3CBW Preparations, Basic playback, Stop playback, Previous and Next, Pause playback

Page 28

Basic Playback

Basic Playback

Preparations

Operate the remote to set the TV to DVD status.

When pressing the D.CALL button repeatedly different OSD indicator will be displayed for different types of disc DVD, CD etc

Note: The unit do not allow enter DVD mode again (or place a DVD in the disc slot)after it have just left to avoid any damage of the DVD. Wait for 10 seconds to enter again.

Basic playback

Data Side

Stop playback

1. Press INDEX button to go to stop mode, the TV screen will show the start-up logo. For some disc the player can recall the location where stopped, such as DVDs and audio CDs.

2.Press PLAY/PAUSE to resume playback from the location where playback is stopped.

3.Press INDEX twice to stop completely.

1.Place the DVD in the disc slot as figure above. The disc will be loaded automatically after one to two seconds, then the DVD player reads the DVD and displays the opening menu. If there is no disc placed on the disc slot in DVD mode, OPEN will display on the screen all the times)

There is only one disc size can be loaded in the disc slot .

Do not place a disc which is unplayable in this DVD player.

Some disc may not playback automatically, you can press PLAY/PAUSE button to start playback.

2.Some disc may start playback with a menu, use the cursor button on the remote control to select menu options and press PLAY/PAUSE to start, or press digits to select a menu options directly.

Previous and Next

During playback, press PREV key can go back to the beginning of this chapter, then each press of this key will skip a chapter till the start of the disc. (note: Disc function may vary depending on disc format)

Each press of NEXT key during playback will skip the current chapter and play the next one.

Fast forward and Fast reverse

1. Press FWD to fast forward through the disc. Each time the FWD button is pressed, the fast forward motion speed changes. It would cycle through 2X, 4X, 8X, 16X, 32X and normal.

2. Press PLAY/PAUSE to resume normal playback.

3. Press REV to fast reverse through the disc. Each time the REV button is pressed, the fast reverse motion speed changes. It would cycle through 2X, 4X, 8X, 16X, 32X and normal.

4. Press PLAY/PAUSE to resume normal playback.

ZOOM

Press this button can zoom enlarge or lessen the picture.

Each time pressed the picture times will be change.

In zoom mode press navigation buttons to move the picture displayed on the screen

Pause playback

1. Press PLAY/PAUSE to pause playback (still mode). The sound will be muted during still mode.

2. Press PLAY/PAUSE to resume normal playback.

D.CALL

Image 28
Contents HD Ready Digital LCD TV HD Ready Digital LCD TV/DVD Combi Content Safety Notice Front Panel Control Control Panel FunctionConnection DVD insertRemote Control for TV/DVD Combi Installing Batteries Installing BatteriesConnection Instructions GroundingVGA Input YPbPr InputVideo Input Connection and use stepsCI Card Input Scart InputHdmi Input Basic Operating Instructions Turn on the LCD-TVInputs selection +/VSound Mode Select the TV ChannelMenu Operations Picture SoundPicture Menu Options FunctionsSound Menu Options Function Menu Options FunctionLock Menu Options DTV Menu Operations Tuning Menu Options TuningDTV Exit Schedule Menu Time Menu Options Clock Repeat Off Off Time Hour Minute Teletext Call Preparations Basic playbackStop playback Previous and NextAdvanced Playback Jpeg Disc Playback DVD System Setup General Setup On Screen Display OSD Language UsersPassword change PreferenceOK to perform the reset Playable Discs Following discs can be playedDics Protection and DVD Characteristics Compare DVD disc with other discsPage Start/Exit Streaming Media Playing System Streaming Media Playing System Playing a Picture Playing Music Troubleshooting Guide Blank screenSpecifications