GPX TD910B manual AC Power, DC Car Power, Remote Control, RF Antenna, Included TV Stand

Page 5

SETUP

AC Power

Plug the included AC/DC adapter into the POWER INPUT and a standard AC power outlet to power the TV with DVD Player.

DC Car Power

Plug the included DC car adapter into the POWER INPUT and a DC car power outlet to power the TV with DVD Player.

Remote Control

Requires one CR2025 battery (pre- installed)

RF Antenna

Connect the included RF antenna to the RF INPUT, and place the RF antenna in an open area or near a door or window.

If you are experiencing issues receiving television channels, adjust the position of the RF antenna to improve channel reception.

+

CR2025

Included TV Stand

Connect the included TV stand to the bottom of the TV with DVD player as shown in the image to your left.

The stand can be removed by holding down the TV stand and pulling up on the TV with DVD player.

WARNING: Do not hold, carry, or move the TV with DVD player by the TV stand only. Always grab a hold of the main unit firmly when moving.

Car Seat Strap

1Connect the CAR SEAT MOUNT BRACKET to the back of the TV with DVD Player.

2Run the CAR SEAT STRAP through the CAR SEAT MOUNT BRACKET as shown in the images to your left.

3Wrap the slack at the top and bottom of the CAR SEAT STRAP around the headrest of the car seat.

4Tighten the CAR SEAT STRAP to ensure a firm hold on the car seat.

8 GPX TD910B

CUSTOMER HELPLINE 1-314-621-2881

GPX TD910B 9

Image 5
Contents TD910B Important Safety Instructions Introduction Setup Television DVD & CD DVD Setup Menu FeaturesTV with DVD Player IncludedRemovable Stand IntroductionDC Car Power AC PowerRemote Control RF AntennaFavorites Auto ScanGeneral Setup DVD Setup MenuAudio Setup Exit Setup MenuAV Output Memory Card Slot & USB Thumb Drive ConnectionCompany Information