DVD & CD
Loading a DVD or CD
Open the DVD DOOR, and load a DVD or CD into the TV with DVD player (label side facing out).
Playing a DVD or CD
1Adjust the POWER SWITCH on the side of the unit to the “ON” position.
2Press the POWER BUTTON on the front of the TV with DVD Player.
3Press the SOURCE button, switch to DVD mode, and press the ENTER button.
4The loaded disc will begin playing automatically. If it doesn’t, press the PLAY/PAUSE button on the remote.
Programming a DVD or CD
1Begin playing a DVD or CD.
2Press the PROG button on the remote.
3Use the NUMBER KEYPAD on the remote to enter the DVD chapters and titles, or the CD tracks in the order you would like them to play.
4Press the
DVD SETUP MENU
DVD Setup Menu
To access the DVD setup menu, press the SOURCE button to switch to DVD mode, then press the SETUP button on the remote.
General Setup Page
TV Display
Angle Mark
TV Type
Screen Saver
OSD Language
Last Memory
Audio Setup Page
Analog Audio Setup
Preference Page
Audio
Subtitle
Disc Menu
Default
Exit Setup Menu
12 GPX TD910B | CUSTOMER HELPLINE | GPX TD910B 13 |