Westinghouse LTV27W6, LTV-27w6 HD user manual Side Connectors

3INSTALLATION

SIDE CONNECTORS

1. YPbPr2 / Audio2 (Right / Left)

Connect the component video to an external video device such as a DVD or gaming system.

2. YPbPr1 / Audio1 (Right / Left)

Connect the component video to an external video device such as a DVD or gaming system.

3. S-Video

Connect to an external video device such as a VCR. Audio (R/L) input supports either S-Video or AV input.

4. AV Video / Audio (Right / Left)

Connect the composite video to an external video device such as a VCR. Audio (R/L) input supports either S-Video or AV input.

5. DVI-HDCP / Audio (Right / Left)

Connect to an external DVI-HDCP device such as a DVD, cable/satellite receiver, or computer.

6. HDMI / Audio (Right / Left)

Connect to an external HDMI device such as a DVD or cable/satellite receiver. To use analog audio for HDMI, open the OSD menu, and under the Audio menu, use the left/right arrow key to change HDMI to Analog.

7. Audio Out (Right / Left)

Connect this output to an external audio amplifier.

8. Audio-In (VGA)

Using a 3.5mm mini-jack cable, connect to the Audio out (Green) on a computer.

9. VGA

Using a 15-pin VGA cable, connect to a computer.

10.Service Port Factory use only.

11.ANT (RF-input)

Connect to the antenna or cable service.

12. AC-IN (Power)

Connect the power cord from AC-IN to a power source.

English

11