4
OSD FUNCTION
Power Management
English
Function Name |
| Function | |
| Enable / Disable the Display Power Management Signaling | ||
DPMS Mode | which allows the display to go into Standby mode when there | ||
| is no signal coming in from the selected input. | ||
Power On Plug | Enable High Definition LCD TV to automatically turn on when | ||
power is restored. | |||
| |||
| Sets the High Definition LCD TV to turn off after a specified | ||
| time of no remote or panel button presses. Four options | ||
| available: | ||
Inactivity Off | ξ | Off | |
| ξ | 1 hour | |
| ξ | 3 hours | |
| ξ | 6 hours | |
| Sets the High Definition LCD TV to turn off after a specified | ||
| amount of time: | ||
| ξ | Off | |
| ξ | 30 minutes | |
Sleep | ξ | 60 minutes | |
| ξ | 90 minutes | |
| NOTE: The High Definition LCD TV will take a few seconds to | ||
| come back from sleep mode. | ||
| Sets the power boot up mode: | ||
| ξ E. Saver – takes longer to come back from Standby but | ||
Power Mode |
| requires less power | |
| ξ Normal – takes faster to come back from Standby but | ||
|
| requires more power | |
LED | Turns the LED on the TV on and off | ||
|
|
| |
22