Westinghouse UW32SC1W manual English

TROUBLESHOOTING

Problem	Corrective Action
No picture or the No	• Make sure the VGA cable is properly
Signal message	connected to the LED TV’s VGA port.
appears when a	• Decrease the video resolution setting on the
VGA cable is	computer and try again.
connected.	• Adjust the display settings.
Picture is cut off or
appear in a sidebar	Press	to adjust the Aspect ratio.
screen.
	• Check your antenna connection. If necessary,
	rotate the antenna and wait up to ten seconds
	for a signal.
	• Reduce signal splitters and excessively long
Poor image quality	cables.
	• Replace poor antenna cables and/or
in TV mode (cutoff
picture, snowy	connectors to improve signal quality.
images).	• Press		to adjust the Aspect ratio.
	• Adjust the Noise Reduction setting in Picture
	menu.
	• In HDMI mode, make sure the external device
	is compatible with the LED TV.
	• If any colors (red, green or blue) are missing,
	check the video cable to make sure it is
	securely connected. Loose or broken pins in
	the cable connector could cause an improper
Wrong, abnormal or	connection.
missing colors	• Adjust the Hue, Saturation and Color
	Temperature settings in Picture menu.
	• Connect the TV to another computer and
	check if the problem is with the computer
	screen.

English

57