Westinghouse TX-42F810G manual Aspect Ratio, Position, View Mode VGA, Adjusting View Mode

SETUP MENUS

Adjusting View Mode

1Press the / keys on the remote control to select the desired option.

2Press or to save and exit the screen.

VIEW MODE (VGA)

Select VGA as your input source and use the View Mode sub-menu to adjust the display in VGA mode.

Press on the remote control or Menu on the control panel to display the setup menu screen then select View Mode to display the View Mode sub-menu.

The following options are available:

Aspect Ratio

Use this sub-menu to select the display's aspect ratio in the following options:

•Standard: Picture is displayed in its original size.

•Fill: Picture is displayed to cover the entire screen.

•1:1 Mode: Matches the incoming resolution exactly to the pixels without any scaling.

16:9		A
Aspect Ratio
Standard Fill	1:1 Mode

H. Position

Use this sub-menu to adjust the display’s horizontal position.

16:9 A

H. Position

V. Position

Use this sub-menu to adjust the display’s vertical position.

16:9 A

V. Position

English

33