Sony DAV-HDX686W Enjoying the system’s sound in another room, To set “S-AIRMODE” via the remote

Enjoying the system’s sound in another room

For the S-AIR receiver

You can enjoy the system’s sound by using the S-AIR receiver. The S-AIR receiver can be placed in another room for enjoying the system’s sound there.

For details of the S-AIR receiver, refer to the operating instructions of the S-AIR receiver.

1 Press SYSTEM MENU.

2 Press X/x repeatedly until “S-AIR

MODE” appears in the front panel display, then press or c.

3 Press X/x to select the desired setting.

•“PARTY”: The S-AIR receiver outputs sound according to functions set on the unit.

•“SEPARATE”: You can set the desired function for the S-AIR receiver while unit functions do not change.

4 Press .

The setting is made.

5 Press SYSTEM MENU.

The system menu turns off.

6 Select the desired function on the S-AIR receiver.

xWhen “PARTY” is set

The S-AIR receiver’s function changes sequentially as you press FUNCTION +/– of the main unit (page 39) or S-AIR CH of the S-AIR receiver.

xWhen “SEPARATE” is set

The S-AIR receiver’s function changes by pressing S-AIR CH of the S-AIR receiver as follows.

“MAIN UNIT” t “TUNER FM” t “TUNER AM” t “DMPORT” t “AUDIO” t …

To enjoy the same function as the unit, select “MAIN UNIT.”

When “TUNER FM” or “TUNER AM” is selected on the unit, you can only select the same band for the tuner on the S-AIR receiver. In this case, when you select other than “TUNER FM” or “TUNER AM” on the unit, you can select any band for the tuner on the S-AIR receiver.

7 Adjust the volume on the S-AIR receiver.

Note

•When the sound is other than 2 channel stereo, multi- channel sound is downmixed to 2 channel.

To set “S-AIR MODE” via the remote

Press S-AIR MODE.

The S-AIR mode appears in the front panel display. Each time you press S-AIR MODE, the S-AIR mode changes.

To control the system from the S-AIR receiver

You can control the system from the S-AIR receiver by using the following buttons.

Press Operation

H, X, x, Share the same operations on the

./> remote and unit.

S-AIR CH Change the function of the system.

For details, refer to the operating instructions of the S-AIR receiver.

Enjoying the S-AIR receiver while the unit is in standby mode

For the S-AIR receiver

You can enjoy the S-AIR receiver while the unit is in standby mode by setting “S-AIR STBY” to “STBY ON.”

1 Press SYSTEM MENU.

2 Press X/x repeatedly until “S-AIR

STBY” appears in the front panel display, then press or c.

Control for HDMI/External Audio Device

75US