Sony DAV-HDX686W manual 95US, Additional Information

Symptom	Remedy
A disc does not start playing	• Program Play, Shuffle Play, or Repeat Play has been selected.
from the beginning.	Press CLEAR to cancel these functions before playing a disc.
	• Resume Play has been selected.
	During stop, press x on the unit or the remote and then start playback
	(page 47).
	• The title, DVD or PBC menu automatically appears on the TV screen.
The system starts playing the	• The DVD features an auto playback function.
disc automatically.
Playback stops automatically.	• Some discs may contain an auto pause signal. While playing such a disc, the
	system stops playback at the auto pause signal.
You cannot perform some	• Depending on the disc, you may not be able to perform some of these
functions such as stop, search,	operations. Refer to the operating instructions supplied with the disc.
Slow-motion Play, or Repeat
Play.
Messages do not appear on the	• In the Setup Display, select the desired language for the on-screen display in
TV screen in the language you	[OSD] under [LANGUAGE SETUP] (page 60).
want.
The language for the sound track	• Multilingual tracks are not recorded on the DVD being played.
cannot be changed.	• The DVD prohibits changing the language for the sound track.
The subtitle language cannot be	• Multilingual subtitles are not recorded on the DVD being played.
changed.	• The DVD prohibits changing the subtitles.
The subtitle cannot be turned off.	• The DVD prohibits turning off subtitles.
The angles cannot be changed.	• Multi-angles are not recorded on the DVD being played (page 45).
	• The DVD prohibits changing the angles.
A disc cannot be ejected and	• Contact your Sony dealer or local authorized Sony service facility.
“LOCKED” appears in the front
panel display.
[Data error] appears on the TV	• The MP3 file/JPEG image file you want to play is broken.
screen when playing a DATA	• The data is not MPEG1 Audio Layer 3 data.
CD or DATA DVD.	• The JPEG image file format does not conform to DCF.
	• The file has the extension “.jpg” or “.jpeg,” but is not in JPEG format.
The system does not work	• Disconnect the AC power cord (mains lead) from the wall outlet (mains), then
normally.	reconnect after several minutes.
The Control for HDMI function	• When “HDMI” does not light up in the front panel display, check the HDMI
does not work.	connection (page 26).
	• Set [CONTROL FOR HDMI] in [HDMI SETUP] to [ON] (page 63).
	• Make sure that the connected component is compatible with the [CONTROL
	FOR HDMI] function.
	• Check that the AC power cord (mains lead) of the connected component is
	connected securely.
	• Check the connected component’s setting for the Control for HDMI function.
	Refer to the operating instructions supplied with the component.
	• If you change the HDMI connection, connect and disconnect the AC power
	cord (mains lead), or have a power failure, set [CONTROL FOR HDMI] in
	[HDMI SETUP] to [OFF], then set [CONTROL FOR HDMI] in [HDMI
	SETUP] to [ON] (page 63).
	• For details, see “Using the Control for HDMI Function for “BRAVIA” Sync”
	(page 70).

Additional Information

95US