Wharfedale user manual Video Input, Component Input ports

Connection Instructions

COMPONENT (If connected to S-VIDEO,select the S-VIDEO external input source.)

3.Refer to the DVD player's manual for operating instructions.

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

S-VIDEO Input

-To avoid picture noise (interference), leave an adequate distance between the VCR and TV

Connection and use steps:

1.Read the user guide supplied with your AV devices and ensure that it has S-Video connectors;

2.Make sure that the power of the LCD-TV and the AV device are switched off;

Connection Option 1

Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

Connection Option 2

1.Connect the audio and S-VIDEO cables from the VCR's output jacks to the TV input jacks, as shown in the figure.

2.Insert a video tape into the VCR and

press PLAY on the VCR. (Refer to the VCR owner s manual.)

3.Turn on the power of the LCD-TV first ; and then turn on the power of the AV device;

4.Press the SOURCE button to set the video

. input mode of the LCD-TV to SVIDEO

mode .

2

1

VCR

Customer helpline:0845 604 0105