DVD Player Operation
Disc Loading Steps:
1.Press the POWER button to turn on the power. Press the SOURCE button and select DVD mode, press the ENTER button confirm and shift to DVD mode.
2.Handing the disc with its printed side outward vertically to the disc tray. (Referring to the below picture.)
3.Gently put the disc into the disc tray.
4.Disc will automatically be pulled into the disc player. While the disc is loading, “Loading” will appear on the liquid crystal display and playback will begin.
Warning: Do not play poor quality discs that may damage the player.
DVD Playback
Region Code
DVD players and discs are coded by region. These regional codes must match the played discs. If the codes don’t match, the disc cannot be played. This player’s default code is region 1.
Play
Press the 4PLAY button to start playback. Press the STOP button once on the remote control to stop playback, and press the4PLAY button again to resume playback.
Stop
Press the ■ STOP button once to stop playback and then press 4PLAY button to resume. Press this button twice to stop playback completely.
30