Troubleshooting
SYMPTOM | CHECK ITEM |
The player does not play.
There is no sound.
LCD is no display
DVD does not continue to play or plays the same section repeatedly.
There is no picture or picture moves up and down.
The remote control does not work.
Make sure disc is loaded in.
Make sure disc is loaded upside down. Make sure disc is not dirty or warped.
Make sure the player’s region code is the same as region code of DVD disc.
Make sure water condensation has not occurred. If it occurs, take out disc and leave the player on for at least one hour.
Make sure system connection is correct.
Make sure the sound setup of DVD disc is correct. Make sure disc is not dirty or warped.
Clean or replace the disc.
Make sure the speakers are not muted.
In the TV mode, set the correct sound mode.
Make sure the unit is turned on and the connections are correct.
Make sure the power adapter is correctly connected.
Make sure disc is not dirty or damaged.
Check if the connections with the external AV signal source are correct.
Correctly set the items in the picture menu.
Check if the video type input signal is not corresponding to the unit.
Make sure the unit is turned on and in correct video type.
Make sure there are no obstructions between the remote control and the player.
Make sure the remote control is pointing at the player. Make sure batteries are inserted and the polarity is correct. Make sure batteries are not weak.
Other Notes:
Static or other external interference may cause the player to behave abnormally. In this occurrence,
unplug the powersupply cord from the outlet and plug it in again to reset the player. If the problem
persists, then please disconnect the power and consult a qualified technician.
43