O. Setup
System Setup Page
1)With no disc inside the player, press ‘SETUP’ to display the Main screen of the Setup Menu on the screen and “SYSTEM SETUP” appears. At the sam
e time, “ 
”is highlighted. Press ‘SETUP’ again to exit the Setup Menu .
2)Press the 
button, “Screen Saver” is highlighted.
3)Press the 
or 
button to select the other menus in system setup page.
4)Press 
to enter the sub menu.
5)Press the 
or 
button to select the sub menu and press the ENTER to confirm your selection.
6)Repeat steps
Note: Press 
to return the previous menu.
SCREEN SAVER
*On: Enables screen saver
*Off: Disables screen saver (off)
*Note: The DVD player will enter the Screen Saver mode after approximately five minutes if the same image remains on the screen.
ANGLEMARK
*On: The screen will show the angle mark icon. (*If an angle option is available).
*Off: The screen will not display the Angle Mark
Note: Not all discs contain above features. The above features are disc dependent.
23
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com