Curtis DVD1100UK user manual Display Setup, Color Space, Film Mode

Page 13

SYSTEM SETUP

2. DISPLAY SETUP

Select Video in the setup menu, and display the Video submenu:

Display

Menu

TV Type

NTSC

TV Aspect

16:9

Resolution

1080P

Color Space

xvYCC

Film Mode

off

BACK

To Index Menu

ENTER: switch menu item

: make choice

 

 

2.1TV Type: Select TV type.

2.2TV Aspect:: Select display configuration for disc.

16:9: Content presented in 16:9 geometry for widescreen TVs.

16:9PB: Content presented in 4:3 geometry or cropped content for widescreen TVs.

4:3: Content presented in 4:3 geometry with horizontal black bars on top and bottom for conventional TVs.

4:3 Pan and Scan: Content cropped to fit within 4:3 geometry for conventional Tvs.

Note: Under HD(720P / 1080i / 1080P) mode, only 16:9 and 16:9PB are available.

2.3Resolution: Select desired resolution.

2.4Color Space

User can select the best color space the TV supported for best color effect

xvYCC: player implements a fallback algorithm in which the flow is xvYCC->YCC->RGB base on EDID information via HDMI

YCC: player implements a fallback algorithm in which the flow is YCC->RGB base on EDID information via HDMI

RGB: player will output video using RGB color space

Note: Color space setting only affects HDMI video output. Choose correct option here if you know the color space feature of TV, choose xvYCC option to let player decide for you. For some special case, e.g. the TV has wrong EDID information, please change color space to RGB.

2.5 Film Mode

On: player will output disk content recorded at 24 frames per second directly

Off: player will convert 24frams/sec content to 1080p 60Hz output

Note: This item is only affect HDMI output, if no HDMI connect to player or TV do not support 1080p24Hz, it will be locked to “Off” option.

2.6BACK: Return to main setup menu.

12

Image 13
Contents DVD1100UK Content Introduction Important Safety InstructionsFeatures Rear panel2CH Audio output Front panelUsing the remote Remote ControlConnect the BD Player to TV SET Using the Hdmi Output Connect the BD Player to TV SET Using the Y/Pb/Pr JacksConnect BD Player to TV SET by AV Cable Connecting to an AV Amplifier with Digital Audio Input Audio OPEN/CLOSESubtitle RandomNext ResolutionPrev MuteVOLUME+ SetupPOP MENU/TITLE RepeatLanguage Setup BD Player Setup MenuFilm Mode Display SetupColor Space 1Digital Output Audio setup menuParental control menu Reload Default Setting? Okay/Canel Diagnostic MenuBack Erase nonvolatile storageFile Disk Playback ----- WMA/MP3/JPEGWMJ files in disk Play Add Play List Set As BGM Ensure you have entered the correct AV input for your TV Discs Compatibility AccessoriesVideo out Audio out